manualshive.com logo in svg

Canon GP335, Руководство по обслуживанию, Страница: 125 / 200

Поделиться
Скачать
Canon GP335 Скачать руководство пользователя страница 125

4-57

CHAPTER 4  SERVICE MODE

<DENS>

FUNCTION

Density Auto Adjustment
Be sure to execute shading correction before executing density auto adjustment; be sure also to
execute WHITE-ME, PD-DENS, PD-ME, DZ-DENS, and DZ-ME in the order indicated.

Level 3

WHITE-ME

PD-DENS

Remarks

Description

Executes white level density auto correction.

n

Operation

1) Place about five sheets of white paper (whitest used by

the user) on the copyboard, and select WHITE-ME to
highlight; then, press the OK key.

2) The scanning lamp makes a single scan, and the

operation ends.

Generates a print pattern for density auto adjustment in text
or text/photo mode.
Text and text/photo mode uses binary processing in a PD
method, requiring the execution of this mode for density
correction.

n

Operation

1) Select <PD-DENS> to highlight, and press the Start key.
2) Check that a 15-gradation print pattern (with black

patches) is generated. Keep the pattern for <PD-ME.>

White paper

Содержание GP335









































































































































































































Отзывы:

Нет отзывов