manualshive.com logo in svg

Canon GP215, Руководство по обслуживанию, Страница: 52 / 217

Поделиться
Скачать
Canon GP215 Скачать руководство пользователя страница 52

14

The copy has blurred images.

3–16

TROUBLESHOOTING IMAGE PROBLEMS

Cause

Scanner drive
cable

Scanner rail

Drum drive
assembly,
Photosensitive
drum

Developing
gear

Drum drive
assembly,
Drum unit

Step

1

2

3

4

Checks

Does the cable on the cable
pulley become twisted or frayed
while the scanner is 
moving?

Move the No. 1 mirror mount
slowly by hand. Does it move
smoothly?

Is the problem noted at inter-
vals of about 94 mm?

Is the problem noted at inter-
vals of 35 mm?

Yes/No

YES

NO

YES

YES

Action

1. Re-route the cable.
2. Replace the cable.

Clean the surface of the scan-
ner rail with alcohol; thereafter,
apply a small amount of lubri-
catnt.

1. Check the drum drive

assembly.

2. Check the drum ends (in

contact with the developing
rolls) for scratches and for-
eign matter.

Check the developing assem-
bly.

1. Check the drum drive

assembly.

2. Replace the drum unit.

Содержание GP215


























































































































































































































Отзывы:

Нет отзывов