Canon GP215 Скачать руководство пользователя страница 165

Страница: 165 / 217

7–57

SERVICE MODE

7. Registering the Multifeeder Paper Width

CANCEL

*4* FUNCTION 07 – > ( )
AD =xxxx

MF-A6R =xxx
MF-A4R =xxx
MF-A4 =xxx

SIZE =xxx.x (mm)

–

JUMP

Item

Multifeeder paper width basic
value registration

Description

1) Place an A6R sheet* in the multifeeder, and

adjust the side guide to A6R.
*A6 is what you obtain folding A4 into four, with its
width being 105 mm.

2) Check the screen to make sure that the VR output

is indicated under ‘AD=xxx’ as soon as the side
guide is adjusted to A6R.
Then, press ‘MF-A6R’ to highlight, and press the
OK key.

• The value will be stored under ‘MF-A6R’.
3) Likewise, place and A4R sheet in the multifeeder,

and adjust the side guide to A4R.

4) Check to make sure that the AD value has been

indicated; then, press ‘A4R’ to highlight, and
press the OK key.

• The value will be stored under ‘A4R’.
5) Then, place an A4 sheet of paper in the multifeed-

er, and adjust the side guide to A4.

6) Check to make sure that the AD value has been

indicated; then, press ‘A4;’ to highlight, and press
the OK key.

• The value will be stored under ‘A4’.
7) Press the Reset key twice to end service mode.
8) Turn off and then on the main power switch.

Reference

page

See P.2-15

Содержание GP215

























































































































































































































Результаты поиска

Содержание GP215

Отзывы:

Canon GP215, Руководство по обслуживанию, Страница: 165 / 217

Результаты поиска

Содержание GP215

Отзывы: