Canon GP215 Скачать руководство пользователя страница 181

Страница: 181 / 217

7–73

SERVICE MODE

Item

SPCL-PPR

SCAN_SEL

FAX_DOC_FEED

Function

Use it to change thick
paper mode.

Use it if parts of an image
are missing in main scan-
ning direction on large-
size papers when using
the feeder and copying a
non-default original.

use it to switch reading
patterns for RDF-G1 fax
originals.

Description

0: The thick paper mode remains off.
1: Switching the fixing temperature, the thick

paper mode is supported.

2: The fixing temperature is switched so that

paper thicker than that supported under ‘1’
may be supported.
However, for ‘1’ and ‘2’ , the icon for the
special cassette must be registered using
‘ADDITIONAL FUNCTION’ (i.e., the third
icon from the middle row).

0: Nomal copying mode.
7: Priority on paper mode*

*Center reference output prevents missing
images.

0: The topmost page of the stack of originals

will be picked up and read first and dis-
charged on the right.

1: The bottommost page of the stack of origi-

nals will be picked up and read first and
returned to the original tray (same way as
copying).

Содержание GP215

























































































































































































































Результаты поиска

Содержание GP215

Отзывы:

Canon GP215, Руководство по обслуживанию, Страница: 181 / 217

Результаты поиска

Содержание GP215

Отзывы: