Canon Finisher-AB1, Руководство по обслуживанию

Страница: 152 / 463

Chapter 5
5-46
14) Based on the output results, measure the degree
of misalignment [A] or [B] between the rear
staple position [1] and the front staple position
[2].
If the degree is significant, follow the steps below
to adjust the tilting of the saddle staple unit.
F-5-154
15) Loosen the 2 screws [1] used to secure the saddle
staple unit.
F-5-155
16) Adjust the tilting of the saddle staple unit in
accordance with the degree of misalignment in
the staple positions.
- If, as described in step 14), the front staple
position has shifted downward (the degree of
misalignment [A])
Action to take:
Move the staple unit [1] in the direction of the
black arrow [A] by an amount equivalent to the
shift.
- If, as described in step 14), the front staple
position has shifted upward (the degree of
misalignment [B])
Action to take:
Move the staple unit [1] in the direction of the
white arrow [B] by an amount equivalent to the
shift.
17) Return the finisher to the operable status by
following steps 1) to 8) and step 15) but in reverse.
5.3.2.22 Saddle disengage roller position
adjustment
0016-6915
This adjustment is to be carried out when there is a
noticeable misalignment in the folding position or
stapling position.
<MEMO>
This operation adjusts the size of the gap between the
disengage roller and the paper, and improved paper
feed performance in the saddle assembly.
F-5-156
[A]
[B]
[1]
[2]
[1]
[2]
[1]
[2]
M102
[1]