Canon Finisher-AB1, Руководство по обслуживанию

Страница: 449 / 463

Chapter 6
6-10
E5F2
Saddle roller guide HP sensor malfunction or saddle guide motor malfunction
8001 02 Saddle roller guide HP sensor does
not come ON within 5 sec. after
saddle guide motor operation begins. -Check saddle guide motor and saddle roller guide HP
sensor connectors.
-Replace saddle guide motor and saddle roller guide
HP sensor.
-Replace saddle stitcher controller PCB.
8002 02 Saddle roller guide HP sensor does
not go OFF within 5 sec. after saddle
guide motor operation begins. -Check saddle guide motor and saddle roller guide HP
sensor connectors.
-Replace saddle guide motor and saddle roller guide
HP sensor.
-Replace saddle stitcher controller PCB.
E5F3 Saddle alignment guide
8001 02 Saddle alignment plate HP sensor
does not come ON within 5 sec. after
saddle alignment motor operation
begins. -Check saddle alignment motor and saddle alignment
plate HP sensor connectors.
-Replace s saddle alignment motor and saddle
alignment plate HP sensor.
-Replace saddle stitcher controller PCB.
8002 02 Saddle alignment plate HP sensor
does not go OFF within 5 sec. after
saddle alignment motor operation
begins. -Check saddle alignment motor and saddle alignment
plate HP sensor connectors.
-Replace s saddle alignment motor and saddle
alignment plate HP sensor.
-Replace saddle stitcher controller PCB.
E5F4
Saddle staple malfunction
8001 02 Saddle unit not detected in home
position within 500 ms after saddle
unit operation begins. -Check stitcher unit connectors.
-Replace stitcher unit.
-Replace saddle stitcher controller PCB.
8002 02 Saddle unit does not leave home
position within 500 ms after saddle
unit operation begins. -Check stitcher unit connectors.
-Replace stitcher unit.
-Replace saddle stitcher controller PCB.
E5F6
Saddle paper strike plate operation malfunction
8001 02 Saddle paper strike plate HP sensor
does not come ON within 800ms.
after saddle paper strike plate motor
operation begins. -Check saddle paper strike plate motor and saddle
paper strike plate HP sensor connectors.
-Replace saddle paper strike plate motor and saddle
paper strike plate HP sensor.
-Replace saddle stitcher controller PCB.
8002 02 Saddle paper strike plate HP sensor
does not go OFF within 300ms. after
saddle paper strike plate motor
operation begins. -Check saddle paper strike plate motor and saddle
paper strike plate HP sensor connectors.
-Replace saddle paper strike plate motor and saddle
paper strike plate HP sensor.
-Replace saddle stitcher controller PCB.
8002 02 Saddle paper strike plate HP sensor
does not go OFF within 300ms. after
saddle paper strike plate motor
operation begins. -Check saddle paper strike plate motor and saddle
paper strike plate HP sensor connectors.
-Replace saddle paper strike plate motor and saddle
paper strike plate HP sensor.
-Replace saddle stitcher controller PCB.
Code Detail
code
Occurrence
classification Description Treatment/ detection timing
- Occurrence classification
02: Finisher (including inserter, puncher, trimmer)
11: POD deck 12: Secondary POD deck
51: Stacker 52: Secondary stacker
- When turning ON the power, be sure to turn ON the power in the following order: pickup/delivery accessories ->
Main Body: Otherwise the pickup/delivery accessories are not recognized.