Preparing to Send a Fax
7-2
Send
ing F
a
x
e
s
7
Set the resolution as follows:
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Press [Image Quality].
The LCD display shows the current resolution setting.
3
Press [Image Quality] repeatedly until the resolution you want is displayed
➞
press [OK].
4
Continue with the operation you wish to complete.
If you do not proceed with any other operation, the LCD display returns to standby mode after about 5 seconds.
Adjusting the Exposure (Density)
You can adjust the lightness/darkness of the document pages before you scan for sending.
You can select the scanning density from the following:
•
<LIGHT> for documents with dark text or color.
•
<STANDARD> for normal printed or type written text.
•
<DARK> for documents with light text or color.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Press [Exposure].
The LCD displays the current exposure setting.
3
Press [Exposure] repeatedly until the scanning density you want is displayed
➞
press [OK].
4
Continue with the operation you wish to complete.
If you do not proceed with any other operation, the LCD display returns to standby mode after about 5 seconds.
FAX RESOLUTION
STANDARD
➞
31/12/2003 WED 10:00
FaxOnly
STANDARD
DENSITY CONTROL
STANDARD
➞
31/12/2003 WED 10:00
FaxOnly
STANDARD