Canon FAXPHONE B95 Скачать руководство пользователя

Страница: 74 / 116

7-9

IN
G T

M MODE

Playing telephone messages

Telephone messages will be played back in order from the oldest message recorded. If a voice
memo has been recorded, it will be played back first.

Follow the procedures below to delete all messages.

Press [Play].

The date and time when the telephone message was recorded, the number of telephone messages and
the number of the message being played (ICM No.) are displayed whenever a message is played.

Press [Delete].

Press [ ] to delete all messages.

• A voice memo is not deleted (see p.7-6).
• If you change your mind and decide not to delete all messages, press [#].

SUN 17:15

02/05

• Press [

] to listen to the message again. (Repeat)

• Press [

] to play the next message. (Skip)

• Press [

] twice to play the previous message.

• Press [Stop] to stop playback.
• Press [Delete] during playback to delete a message.
• Use [

] or [

] to change the volume.

YES=(

) NO=(#)

Содержание FAXPHONE B95





















































































































Результаты поиска

Содержание FAXPHONE B95

Отзывы:

Похожие инструкции для FAXPHONE B95

Бренды по названию

Популярные бренды

Canon FAXPHONE B95, Руководство пользователя

Результаты поиска

Содержание FAXPHONE B95

Отзывы:

Похожие инструкции для FAXPHONE B95

Бренды по названию

Популярные бренды