Canon FAXPHONE B95 страница 104 Скачать руководство пользователя

Страница: 104 / 116

9-15

SOLUTIONS

TO CO

MMON PROBLEMS

CHANGE CARTRIDGE

The BJ Cartridge

is empty.

Replace the BJ Cartridge

(see p. 9-5). The fax will then
print automatically any
documents received in
memory.

CHECK DOCUMENT

The document is not set in the
document tray, or has jammed.

Set the document you are
trying to send or copy (see p.
3-2), or check for a document
jam and clear the jam if
necessary (see p. 9-1), and
start again.

CHECK PAPER SIZE

The size of the paper in the multi-
purpose tray and that specified in
the PAPER SIZE setting are
different.

Load the correct paper size or
change the PAPER SIZE
setting (see p. 8-4).

CHECK PRINTER

There may be an obstruction that
is not allowing the cartridge
holder mechanism to move.

Check for any obstruction
(paper clip, small object, etc.)
and also that the orange
protective cap and tape are
removed from the BJ
Cartridge

. Check also for a

paper jam and clear the jam if
necessary (see p. 9-1). Then
press [Stop] and start again.

The BJ Cartridge

may be

defective.

Press [Stop]. Reinstall the BJ
Cartridge

(see p. 1-9) and

start again.

In either case, if the error does
not clear, try unplugging the
fax. Wait several minutes, then
plug it back in. Also, try
replacing the BJ Cartridge

with a new one (see p. 9-5).

The waste ink tank (which holds
the ink used for print head
cleaning) may be full.

Contact the Canon Customer
Care Center (see p. ii) to have
the waste ink tank replaced
immediately.

During printing, the BJ
Cartridge

print head may have

become too hot.

Allow the fax to cool down.
The fax will resume printing
when it has cooled down.

Message

Cause

Action

Содержание FAXPHONE B95





















































































































Результаты поиска

Содержание FAXPHONE B95

Отзывы:

Похожие инструкции для FAXPHONE B95

Бренды по названию

Популярные бренды

Canon FAXPHONE B95, Руководство пользователя

Результаты поиска

Содержание FAXPHONE B95

Отзывы:

Похожие инструкции для FAXPHONE B95

Бренды по названию

Популярные бренды