Canon FAX L290 Скачать руководство пользователя страница 169

Страница: 169 / 229

Chapter 13

Troubleshooting

13-13

roub

leshooting

Paper Feeding Problems

■

Paper does not feed properly.

The multi-purpose tray may contain too many sheets.

• Make sure you load the correct quantity (

p. 5-2).

The paper may not be loaded correctly.

• Make sure the paper stack is loaded correctly in the multi-purpose tray (

p. 2-16).

■

Multiple sheets feed together into the FAX.

The paper may not be loaded correctly.

• Make sure the paper stack is loaded correctly in the multi-purpose tray (

p. 2-16).

The multi-purpose tray may contain too many sheets.

• Make sure you load the correct quantity (

p. 5-2).

Different types of paper may be loaded in the multi-purpose tray.

• Load only one type of paper.

• Make sure you load paper that meets the requirements for the FAX (

p. 5-2).

• Let the paper run out before refilling the multi-purpose tray. Avoid mixing new stock

with paper already loaded.

■

Repeated paper jams occur.

The paper you are using may be causing the jams.

• Make sure you load paper that meets the requirements for the FAX (

p. 5-2).

Faxing Problems

Sending Problems

■

Cannot send a fax.

The FAX may not be set for the correct telephone line type.

• Make sure the FAX is set for the correct telephone line type (

p. 3-8).

The document may not be loaded correctly.

• Make sure the document is loaded correctly in the ADF (

p. 4-3).

• Make sure the operation panel is closed.

The one-touch speed dialling button or coded speed dialling code you entered
may not be registered correctly.

• Check that the speed dialling settings are registered correctly (

Chapter 6).

Содержание FAX L290






































































































































































































































Результаты поиска

Содержание FAX L290

Отзывы:

Canon FAX L290, Руководство пользователя, Страница: 169 / 229

Результаты поиска

Содержание FAX L290

Отзывы: