manualshive.com logo in svg

Canon FAX L290, Руководство пользователя, Страница: 165 / 229

Поделиться
Скачать
Canon FAX L290 Скачать руководство пользователя страница 165

Chapter 13

Troubleshooting

13-9

T

roub

leshooting

CHECK COVER

CHECK DOCUMENT

CHECK PAPER SIZE

CHECK POLLING ID

CHECK PRINTER

—

#001

—

#021

#008

—

The front cover is open.

A document is jammed in
the ADF.

The size of the paper in
the multi-purpose tray
and that specified in the

PAPER SIZE

setting are

different.

No subaddress and/or
password has been
entered on your unit, or
the subaddress and/or
password do not match
the settings on the other
party’s fax machine.

No subaddress and/or
password has been
entered on the other
party’s machine, or the
subaddress and/or
password do not match
the settings on your unit.

The toner cartridge may 
be defective.

The unit is connected to
an uninterruptible power
supply (UPS).

Close the front cover.

Clear the document jam
(

1

p. 13-2). Then start

again.

Load the correct paper size
(

1

p. 2-16) or change the

PAPER SIZE 

setting 

(

1

p. 5-7) to match the

size of the paper loaded in
the multi-purpose tray.

Make sure the subaddress
and/or password match the
settings on the other
party’s fax machine 
(

1

p. 9-10).

Contact the other party to
enter the correct
subaddress and/or
password.

Reinstall the toner cartridge
(

1

p. 2-13). If the message

remains in the LCD, replace
the toner cartridge 
(

1

p. 12-7).

Make sure the unit is
plugged into an AC outlet.

In either case, if the error
does not clear, try
unplugging the unit. Wait
five seconds, then plug it
back in. If the message
remains in the LCD,
contact your local
authorised Canon dealer or
the Canon help line.

Message

Error Code Cause

Action

Содержание FAX L290






































































































































































































































Отзывы:

Нет отзывов