Canon FAX L290 Скачать руководство пользователя страница 129

Страница: 129 / 229

Chapter 9

Special Features

9-15

Special Features

Scanning a Document into the Polling Box

Follow this procedure to store a document in the polling box so that other fax machines
can retrieve it:

You need to set up the polling box before you can scan a document into the polling box (

p. 9-12).

Load the document, face down in the

Ex:

ADF (

p. 4-3).

• To adjust the resolution and contrast,

(Currently used memory)

see pp. 7-2, 7-3.

• You may be unable to scan if the

memory used (shown in the LCD) is

(Standby to scan)

close to

100%

. To free up space in the

FAX’s memory: print, send, or delete any
documents you no longer need to be
stored in memory (

p. 9-5).

Open the one-touch speed dial panel.

Press

Polling

Press

Set

• The FAX scans the document into the

polling box.

When another fax machine polls your FAX, the following conditions apply:

• If you registered a password for the polling box, the other party’s fax machine must

request the document with this exact same password.

• If you have not registered a password for the polling box, but the other fax machine

requests the document from your FAX with a password, the document cannot be
retrieved.

Changing or Deleting the Polling Box Settings

Follow this procedure to change or delete the polling box settings:

You will be unable to delete the polling box settings if you have scanned a document into
the polling box (see above). Delete the document from memory first before following the
procedure below (

p. 9-9).

Open the one-touch speed dial panel.

POLLING TX

DOCUMENT READY

MEMORY USED 0%

Содержание FAX L290






































































































































































































































Результаты поиска

Содержание FAX L290

Отзывы:

Canon FAX L290, Руководство пользователя, Страница: 129 / 229

Результаты поиска

Содержание FAX L290

Отзывы: