Canon EOS RP, Инструкция по эксплуатации

Страница: 610 / 841

402
Geotagging Images
You can geotag images with GPS Receiver GP-E2 (sold separately) or a
Bluetooth enabled smartphone.
Using GP-E2
1
Attach GP-E2 to the camera.
z
Attach GP-E2 to the camera’s hot shoe
and turn it on. For details, refer to the
GP-E2 Instruction Manual.
2
Select [
5
: GPS device settings].
3
Select [GPS receiver].
4
Take the picture.
z
For details on [Set up] , refer to the GP-
E2 Instruction Manual.
Precautions When Using GP-E2
o
Be sure to check the countries and regions where its use is allowed, and use
the function in accordance with the laws and regulations of the country or
region.
o
Make sure the GP-E2 firmware is updated to Ver. 2.0.0 or later. Firmware
updating requires an interface cable. For updating instructions, visit the Canon
website.
o
The cable cannot be used to connect the camera to the GP-E2.
o
The digital compass cannot be used with the camera, and the shooting
direction is not recorded.