Canon EOS Rebel SL2 EOS 200D, Инструкция по эксплуатации

Страница: 80 / 458

C
Creative Auto Shooting
80
(2) Background blur
• If [ OFF ] is set, the degree of background blur will change
depending on the brightness.
• If it is set to any setting other than [ OFF ], you can adjust the
background blur regardless of the brightness.
• The further you move the cursor to the right with the <
6
> dial,
the sharper the background will look in the picture.
• The further you move the cursor to the left with the <
6
> dial, the
more blurred the background around the subject will be. Note that
depending on the speed of the lens (f/number), certain slider
adjustments may not be selectable (indicated by •).
• When operating the <
6
> dial during Live View shooting,
[ Simulating blur ] will be displayed on the LCD monitor. You can
see the degree of front and background blur in contrast with the
subject that is focused on during setting operation (while
[
Simulating blur ] is being displayed).
• If you want to blur the background, see “Shooting Portraits” on
page 87.
• Depending on the lens used and shooting conditions, the
background may not look so blurred.
• This function cannot be set if you use flash. If <
a
> is set and you
set background blur, <
b
> will be set automatically.
If [ Simulating blur ] is enabled during Live View shooting, the image
displayed with <
g
> (p.199) blinking may have more noise than the actual
image being recorded, or it may look dark.