Canon EOS 5D Mark II - EOS 5D Mark II 21.1MP Full Frame CMOS Digital SLR..., Руководство по обслуживанию

Страница: 38 / 285

General Information
33
16-11 Direct Print: With camera's Direct Print button
⑴ When the camera is ready for printing and you playback an
image, the Direct Print button's blue lamp lights. Select an
image and press the Direct Print button to start the printing.
⑵ During printing, the blue lamp blinks.
⑶ On the image playback screen, the print settings (paper size,
border, date, etc.) are also displayed.
⑷ To change the print settings, press the SET button before
printing. (Same procedure as normal direct printing.)
17．PictBridge
17-1 Configuration:
Camera, PictBridge-compatible printer, interface cable IFC-
400PCU
・ Even while the PictBridge printing screen is displayed, the
camera can instantly
17-2 Operation method:
By operating the camera, the image is printed directly by the
PictBridge-compatible printer.
17-3 Compatible printers:
PictBridge-compatible printers
17-4 Paper sizes: L
＋
, 2L
＋
, postcard
＋
, card (5.4 8.6 cm), 10 15 cm, 5" 7"
＋
,
8.5" 11"
＋
, A4
＋
, 11" 17"
＋
, A3
＋
, A3 wide
＋
(13" 19"),
roll paper (9/10/13/21 cm), 8.9 25.4 cm
＋
(panorama), Wide,
10 12 in.
＋
, 8 10 in.
＋
⑴Selectable paper sizes may differ depending on the printer.
⑵ Papers indicated with a + sign enable the Print with shooting
information to be printed as well. (Applicable only to Canon
printers compatible with this feature.)
17-5 Paper types: Plain, Photo (Photo Paper Plus Glossy), Fast Photo (Photo
Paper Pro), Default (Photo Paper Plus Glossy)
⑴Canon paper names are in parentheses above.
⑵Selectable paper types may differ depending on the printer.
17-6 Printing effects
1) With Canon printers:
(Image optimization): ON (Exif print), OFF (No printing effects), VIVID/NR (Noise
reduction), VIVID+NR, Normal (Exif print), Face
2) With non-Canon printers:
ON, OFF, Normal
⑴ The settings for ON/Normal are set by the printer
manufacturer.
⑵ Selectable printer effects may differ depending on the
printer.
17-7 Trimming: Trim horizontally up to 8 steps, vertically up to 5 steps.
・ The trimming method will depend on the BJD/CPD printer.