Canon EOS 5D Mark II - EOS 5D Mark II 21.1MP Full Frame CMOS Digital SLR..., Руководство по обслуживанию

Страница: 101 / 285

Repair Information
6
Expendables List
New Name Part No. Purpose/Subject
Light-shield tape CY9-4026-000 M2 motor
Scotch tape (No. 315) CY9-4031-000 ―
Double-sided tape CY9-4034-000 Adhesive for body
Aron Alpha 201 CY9-8007-000 Securing SPD and SI in place
Arontite L CY9-8008-000 Screw heads
Three Bond 1401C CY9-8011-000 Screw lock
UTLM-10 CY9-8031-000 Mirror parts
Silicon KE347B CY9-8064-000 Water resistance
Humi-Seal 1B-66 CY9-8069-000 Moisture-proof insulation
Grease IF-10 CY9-8088-000 Mount Spring Friction surface
Variator SJF-102 CY9-8100-000 Parts assembly
Logenest Lambda A-74 CY9-8102-000 M2 gear shafts
Cemedine Super X8008B CY9-8118-000 Mount ring adhesion, etc.
Nox Guard ST-420 CY9-8123-000 Parts assembly
Logenest Lambda NFH-743C CY9-8125-000 Front cover's friction surfaces
Diabond 1663G CY9-8129-000 Adhesive for parts
Friction Inhibitor [hf1] 923 DY9-3042-000 Flex pattern
1.6 Tool Battery Fabrication
Required Parts
⑴ CY9-1101-000 Tool Battery Probe Kit (2)
⑵ DY9-1374-000 Charge Adjustment Tool (1)
Fabrication Procedure
⑴ Prepare the aformentioned products.
⑵ Remove the leads soldered to DY9-1374, and solder the CY9-1101lead wires to the battery
contacts, and put the wires through the hole in the battery cover.
⑶ Solder banana plugs to the end of the leads.
⑷ Tape the tool battery covers together.
After installing the
leads as shown at
the right, close the
battery covers.
DY9-1374-000
Finished Kludge
Fig. 014