Canon EOS 5D Mark II - EOS 5D Mark II 21.1MP Full Frame CMOS Digital SLR..., Руководство по обслуживанию

Страница: 35 / 285

General Information
30
13-7 Index display: Single image display or press the Reduce button for 9-image
display
・ View the previous/next image with the Quick Control Dial or
Main Dial.
13-8 Rotated display:
1) Manual
⑴ With the menu's "Rotate," the image can be rotated
clockwise in 90º, 270º and 0º.
⑵ If the image has been appended with data for original
image verification, image rotation is possible while
keeping the original image recognition intact.
2) Auto image rotation
⑴ Settable with the menu's "Auto rotate."
⑵ When a vertical image is played back in the horizontal
orientation, the camera rotates the image automatically to
the vertical orientation.
⑶ Image rotation is applied during playback and video OUT
(not during image review after image capture).
13-9 Jump:
With the Jump button, browse through images during playback
or switch the menu category (Shooting, Playback, Setup)
⑴ Jump by 1 image
After pressing the JUMP button, press the SET button and
turn the Quick Control Dial to select any of the following
jump modes. After selecting the jump mode, turn the Quick
Control Dial or Main Dial to jump.
・ Jump by 10 images: Jump forward or back by 10 images
・ Jump by 100 images: Jump forward or back by 100
images
・ Jump by shooting date: Jump to the previous or following
day. The day's last shot will be displayed first.
・ Jump by folder: Jump to the previous or next folder. The
folder's newest shot will be displayed first.
Note: Procedure: Image playback → Press JUMP button → Press SET button
→ Turn Quick Control Dial to select JUMP mode → Press SET button to
set → Turn Quick Control Dial or Main Dial to jump.
⑵ Jump with 9-image index display
Turn the Quick Control Dial or Main Dial to jump to the
previous or next screen of 9 index images.
⑶ Jump during magnified view
Turn the Main Dial to jump by 10 images.
⑷ Jump during the menu display
Press the JUMP button to jump to the respective menu's first
item.
13-10 Video output: Compatible with NTSC/PAL video output terminals.
・ Select the type with the menu's "Video system." Use Video
Cable VC-100.