manualshive.com logo in svg

Canon EOS 1V, Руководство по обслуживанию

Поделиться
Скачать
Canon EOS 1V Скачать руководство пользователя страница 21

4-8  AE Lock

(1) Auto AE lock

In the One-Shot AF mode with evaluative metering,
AE lock is set when focus is achieved.

(2) Manual AE lock

Set with the AE lock button (resets when pressed
again). Enabled in all metering modes.

* AE lock cancels when any of the following occurs:

The metering turns off, main switch is set to L, a
mode button (CLEAR, REW, Custom Function, etc.)
is pressed.

* When a Speedlite is used and it is charged and

ready, the AE lock button will not function.

4-9  Multiple exposures:  Maximum 9 multiple exposures per frame.

(Cancelable and resettable at any time.)
Cancels automatically after all the multiple exposures
are taken. Multiple exposures during continuous
shooting enabled (exposure shift less than 0.1 mm).

5. Shutter

5-1  Type: 

Vertical-travel, focal-plane shutter with all speeds elec-
tronically-controlled.
* Front and rear shutter curtains both have dedicated

rotary magnet control. (Curtain speed: 2.2 ms/24mm)

5-2  Shutter speeds: 

30 to 1/8000 sec., X-sync at 1/250 sec.
In the shutter speed-priority AE and manual exposure
modes, shutter speeds in 1/3-stop increments can be
set.

◆

For bulb exposures, the exposure time is displayed
on the LCD panel from 1 - 23 hours and 00:00 -
59:59 min. and sec. (LCD panel shows three bars for
every 30 min. up to 120 min.)

5-3  Shutter release: 

Soft-touch electromagnetic release (no cable release
socket)

5-4  Release time lag: 

Shutter release time lag for stopping down three stops
from the maximum aperture (excludes AF operation
time):
(1) Time lag from SW-1 ON to SW-2 ON and film expo-
sure: 55 ms
(2) Time lag from SW-1 and SW-2 to film exposure:
191 ms

5-5  Self-timer: 

10- or 2-sec. delay.
* Self-timer in progress is cancelable by turning the

main switch to L.

* Self-timer operation indicated by self-timer lamp (2

Hz for the first 8 sec., then 8 Hz for the remaining
two sec.)
Self-timer countdown displayed on frame counter.

None

5-6  Camera shake

warning:

1-19

Part 1: General Information

Содержание EOS 1V

















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды