Canon EOS 1V, Руководство по обслуживанию

Страница: 209 / 240

P
a
rt 1: Product Ov
er
vie
w
1-15
Film Transport
Functions
Other Functions
& Operations
Enables silent (low-
speed) film rewind
when the shutter
button is OFF after
picture-taking. When the EOS-1V without the Power
Drive Booster is set for single-frame
shooting, releasing the shutter button
from the fully depressed position
advances the film silently at low speed. This is useful when the film
advance noise after taking a pic-
ture would be disturbing. • The shutter is actually cocked at
low speed to make it quiet. (The
film advance operation itself
remains the same.)
• With the Power Drive Booster and
single-frame shooting mode,
releasing the shutter button from
the fully depressed position to the
halfway position advances the film
and cocks the shutter normally.
• During continuous shooting, nor-
mal film advance is used.
• If C.Fn-12 is also set for mirror
lockup, the camera noise can be
further reduced.
21
Disables the shutter
release when film
has not been
loaded. If film has not been loaded and the cam-
era back is closed, pressing the shutter
button will have the film cartridge icon
and P.Fn-22 indicator blink on the LCD
panel to warn that shutter release has
been disabled since no film has been
loaded. The P.Fn-22 indicator will also be
displayed in the viewfinder. This prevents the user from trying
to take pictures without having film
loaded. • The shutter button can work while
the camera back is open. In this
case, the shutter speed will be
fixed at 1/8000 sec.
22
The function activa-
tion timer can be
changed to a differ-
ent time length (6
sec., 16 sec., etc.). The activation time can be changed any-
where from 0 to 3600 sec. (60 min.) for
the following buttons:
q
Shutter button halfway position and
AE lock button (standard activation
time: 6 sec.).
w
FE lock button (standard activation
time: 16 sec.).
e
Shutter button fully depressed posi-
tion (standard activation time: 2
sec.).
The user's preferred activation
time after pressing the button can
be set. Also, setting the activation
time to 0 sec. conserves battery
power.
In the case of
e
, metering
remains active for 2 sec. after the
shutter button is pressed com-
pletely. This enables AE lock or
FE lock to remain active.
• If the activation time is long, more
battery power will be required and
fewer rolls of film can be shot with
the battery.
• The function activation can be
turned off by pressing the MODE
button, AF button, or metering
mode button. 23
Keeps the LCD
panel illumination
turned on during
bulb exposures. After the bulb exposure starts, pressing
the LCD panel illumination button turns
on the illumination until the bulb exposure
ends.
This sets the picture-taking mode, meter-
ing mode, film advance mode, AF mode,
and focusing point selection (center
focusing point or automatic selection).
Effective when you want to moni-
tor the elapsed bulb exposure
time. Normally, the LCD panel illu-
mination turns off when the bulb
exposure starts. Since this will consume more battery
power, the bulb exposure time can-
not be as long or fewer rolls of film
can be shot with the battery.
24
Sets the default set-
tings when the
CLEAR button is
ON. When the often-used settings are
set, just pressing the CLEAR but-
ton can call up those settings.
25