Canon EOS-1D Скачать руководство пользователя

Страница: 22 / 176

Recharging the Battery

First, recharge the battery.

•

For details on the battery, refer to the instructions for the Ni-MH Pack NP-E3.

•

For details on how to recharge and discharge the battery, refer to the instructions for the
Ni-MH Charger NC-E2.

Connect the power cord.

•

Connect the power cord to the charger.

•

Connect the power plug to an AC outlet.

The <

POWER

> lamp will light.

Detach the protective cover.

•

Attach the cover to the battery compartment cap
and retain it.

•

Whenever the battery is out of the camera, be sure
to attach the protective cover to prevent short
circuit.

Connect the battery.

•

Connect the charging plug to the battery’s charging
terminal.

•

The charging plug can be connected to either
terminal A or B.

Battery recharging starts.

When the battery is connected, recharging starts
automatically and the <

> lamp lights.

When the battery is completely recharged, the lamp
will start blinking (twice per second).

A completely exhausted battery takes about 2
hours to fully recharge.

•

After recharging the battery, disconnect it and
unplug the power cord from the AC outlet.

Содержание EOS-1D

















































































































































































Результаты поиска

Содержание EOS-1D

Отзывы:

Похожие инструкции для EOS-1D

Бренды по названию

Популярные бренды

Canon EOS-1D, Инструкция по эксплуатации

Результаты поиска

Содержание EOS-1D

Отзывы:

Похожие инструкции для EOS-1D

Бренды по названию

Популярные бренды