Canon EOS-1D Скачать руководство пользователя

Страница: 157 / 176

157

Reference

Exposure Warning List

1) Increase the ISO speed.
2) Use flash.

1) Decrease the ISO speed.
2) Attach a neutral density filter

to the lens.

1) Turn the <

> to set a

slower shutter speed.

2) Increase the ISO speed.

1) Turn the <

> to set a

faster shutter speed.

2) Decrease the ISO speed.

1) Turn the <

> to set a larger

aperture (smaller f/number).

2) Increase the ISO speed.

1) Turn the <

> to set a smaller

aperture (larger f/number).

2) Decrease the ISO speed.

1) Move away from the subject

and try again.

2) If a zoom lens is used, use

the shortest focal length.

1) Increase the ISO speed.
2) Use flash.

1) Decrease the ISO speed.
2) Attach a neutral density filter

to the lens.

The subject is too
dark.

The subject is too
bright.

The picture will be
underexposed.

The picture will be
overexposed.

The picture will be
underexposed.

The picture will be
overexposed.

The desired depth of
field cannot be
obtained.

The subject is too
dark.

The subject is too
bright.

Solution

Indication

Blinking Warning

Mode

The sample warnings apply when a lens having a maximum aperture of f/1.4 and
minimum aperture of f/22 is attached to the camera. The maximum and minimum
aperture warning displays will differ depending on the lens attached to the camera.

Содержание EOS-1D

















































































































































































Результаты поиска

Содержание EOS-1D

Отзывы:

Похожие инструкции для EOS-1D

Бренды по названию

Популярные бренды

Canon EOS-1D, Инструкция по эксплуатации

Результаты поиска

Содержание EOS-1D

Отзывы:

Похожие инструкции для EOS-1D

Бренды по названию

Популярные бренды