Canon DR-X10C - imageFORMULA - Document Scanner Скачать руководство пользователя страница 11

Страница: 11 / 160

– The overall length of the SCSI cable you can use is determined by

the SCSI standards. Refer to the manual for the SCSI card you are
using for more information.

• If the CPU, memory, interface card, and other specifications do not

satisfy the installation requirements, the scanning speed may be
greatly reduced and transmission may take a long time.

• Even if the computer satisfies the recommended specifications, the

scanning speed may vary, depending on the scan settings.

• The ISIS/TWAIN Drivers provided with the scanner do not

necessarily operate on all ISIS- or TWAIN-compatible applications.
For details, contact your application software retailer.

Installation

IMPORTANT

• Install the software before connecting the scanner to the computer

with the USB cable.

• Log on to Windows as an Administrator.
• Close all other applications before installing the software.

Insert the Setup Disc into the disk drive of the computer.

The setup menu automatically starts up when you insert the disc
into the drive. (If the menu does not start up, execute setup.exe
from the disc.)

If the following screen appears, click [Yes] or [Permissions].

Click [Typical Installation].

Hint

If you want to reinstall only specific software that you have
previously uninstalled, select [Custom Installation] and specify
the software.

Содержание DR-X10C - imageFORMULA - Document Scanner

































































































































































Результаты поиска

Содержание DR-X10C - imageFORMULA - Document Scanner

Отзывы:

Бренды по названию

Популярные бренды

Canon DR-X10C - imageFORMULA - Document Scanner, Руководство пользователя

Результаты поиска

Содержание DR-X10C - imageFORMULA - Document Scanner

Отзывы:

Бренды по названию

Популярные бренды