PAGE04
Drum set : Assembly Instructions
PAGE06
*Before attaching parts 6O and 6P, bend them into shape as shown in the diagram.
*Begin from the opposite side to the seam.
*Begin from the opposite
side to the seam.
PAGE07
*NB: Align the thick marker line
with the specified position
on the upper part, and insert
it through. Do not apply glue.
*NB: There are 12 6Q parts altogether.
One of them, marked 6Q-1, has a
specific location for attaching.
Take note of the markings
*Before attaching parts 7P and 7Q, bend them into shape as shown in the diagram.
*Take note of where
the thick marker line is.
*Align the reverse sides and attach.
*NB: Align the thick
marker line with
the specified position
on the upper part, and
insert it through.
Do not apply glue.
Tom-tom 13" x 10"
Upper part
Lower part
Seam
Lower part
Upper part
*Do not apply glue to .
Tom-tom 12" x 9"
Upper part
Lower part
Align the marker lines on 7A
and 7B with the glue spots on
7C ~ 7H, and attach.
*Be sure to align the thick black marker lines
on the top and bottom (circled here in blue)
when attaching.
Seam
Upper part
Lower part
Lower part
Upper part
*Do not apply glue to .
Take note of
the markings
*NB:
There are 12 7R parts altogether.
One of them, marked 7R-1, has a
specific location for attaching.
Specified position
Specified position
