PAGE06
Drum set : Assembly Instructions
PAGE09
Floor tom
PAGE10
Snare drum
PAGE11
Leg
Rubber foot
Upper part
Lower part
Lower part
Upper part
Align the snare wire position and fit the head on.
Do not apply glue.
*Align the reverse sides and attach.
*Align the reverse
sides and attach.
*After completing the
stand, place the snare
drum on the arm.
Do not apply glue.
*Before attaching parts 10R and 10S, bend them into shape as shown in the diagram.
*Begin from the opposite
side to the seam.
Snare wire picture
*Roll up and attach.
*Roll up and attach.
Rubber arm
Stand
Rubber foot
Snare wire position
Head
Shell
Lug
Lug
Head
Shell
Upper part
Lower part
Seam
*NB: There are 8 10T parts altogether.
Align the marker lines on 10A
and 10B with the glue spots on
10C ~ 10H, and attach.
*Be sure to align the thick black marker lines
on the top and bottom (circled here in blue)
when attaching.
*Take note of where
the thick marker line is.
*Do not apply glue to .
Snare drum
*Align the snare
wire position here.
