Canon Color imageRUNNER C4580, Руководство по обслуживанию

Страница: 574 / 851

Chapter 15
15-4
15.3 Scheduled Servicing Basic Procedure
15.3.1 Scheduled Servicing Basic Procedure
- As a rule, provide scheduled servicing every 40,000 prints.
- Before paying a scheduled visit, check the Service Record, and take any parts likely to need replacement.
- If the machine's power plug remains connected to a wall outlet for a long time in a site where there is much
dust, moisture, or oil smoke, it can collect these elements and trigger insulation failure or fires. Be sure to
disconnect the power plug periodically and clean the plug and the area around it with a dry cloth.
Steps
1) Report to the person in charge.
Check the general condition.
2) Record the counter reading.
Check the faulty prints.
3) Make test prints.
(1) check the image density against standards
(2) check for soiling in the white background;
(3) check the clarity of characters;
(4) check the margin;
(5) check the fixing; check for poor registration and soiling on the back.
Standards on margin (single-sided)
leading edge: 2.5 mm +/-1.5 mm,
trailing edge: 2.5 mm +/-1.5 mm, left: 2.0 mm +/-1.5 mm
4) Waste Toner Colleting Container
If the waste toner collecting container is more than half full, dispose of the toner in a plastic bag; or, replace
the toner collecting container itself.
- Be sure to observe all rules and regulations of the governing community when disposing of waste toner.
- Do not dispose of waste toner into fire. (It may explode, causing a significant hazard.)
5) Clean the copyboard glass and the reader glass.
6) Make test copies.
7) Make sample copies.