Canon Color imageCLASS MF8170c, Основное руководство

Страница: 66 / 176

Making Copies 5-2
Cop
y
ing
5
Making Copies
NOTE
•
When making copies on LTR-size paper after having continuously copied on paper
smaller than LTR-size paper, the copies may be dirty. To prevent copies from being dirty,
wait about 1 minute before making copies.
•
When making copies of a small size or heavy paper*, etc., the copy speed may be
slightly slower than usual.
* The paper type should be selected in the Menu. (See "Specifying the Paper Type," on p.
2-20.)
•
If you intend to make a copy and print with a thermal transfer printer using the same
sheet of paper, make the copy first. Failure to do so may make copies dirty or cause a
paper jam.
•
When copying onto transparencies, remove each transparency from the output tray as it
is output.
1
Place the document on the platen glass or load it in the ADF.
For details on how to place documents, see "Setting Up Documents," on p. 3-3.
2
Press [COPY].
3
Use the numeric keys to enter the number of copies.
You can set up to 99 copies.
4
Adjust any necessary settings for your document.
•
Specify the size and the type of the paper you load in the cassette or the
multi-purpose tray. (See "Specifying the Paper Size and Type (Common for Cassette
and Multi-Purpose Tray)," on p. 2-19.)
•
Press [Image Quality] to select the scanning resolution. (See "Adjusting the Image
Quality (Resolution)," on p. 5-6.)
•
Press [Exposure] to select the scanning exposure. (See "Adjusting the Exposure
(Density)," on p. 5-6.)
•
Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing,"
on p. 5-4.)
Basic Guide.book Page 2 Monday, August 9, 2004 5:12 PM