Canon Color imageCLASS MF8080Cw, Основное руководство по эксплуатации

Страница: 124 / 192

6-28
U
sing
the
Fax
Func
tions
6
Select the send start speed using [ ] or [ ] and
press [OK].
TX Start Speed
33600 bps
14400 bps
9600 bps
7200 bps
* Select <Apply> when <Apply> appears on the screen after you
have specified the setting and press [OK].
7
Press [ ] (Menu) to close the menu screen.
The procedure is complete.
Options
The following system management settings are available.
System Settings
Communication
Management
Settings
Fax Settings
“TX Start Speed” (
→
P.6-28)
“RX Start Speed” (
→
P.6-28)
“Memory Lock Settings” ( → P.6-28)
“Select Country/Region” (
→
P.6-28)
Restrict TX
Function
“Address Book PIN” (
→
P.6-28)
“Restrict New Destinations” ( → P.6-29)
“Allow Fax Driver TX” (
→
P.6-29)
“Restrict History TX” (
→
P.6-29)
“Fax No. Confirmation Re-Entry” (
→
P.6-29)
“Restrict Sequential Broadcast” (
→
P.6-29)
TX Start Speed
Change the transmission start speed if you are experiencing
a transmission problem.
How to access the option
[ ] (Menu)
→
<System Settings>
→
<Communication
Management Settings>
→
<Fax Settings>
→
<TX Start
Speed>
Settings
(Bold: Default setting)
33600 bps , 14400 bps, 9600 bps,
7200 bps, 4800 bps, 2400 bps
RX Start Speed
Change the reception start speed if you are experiencing a
problem.
How to access the option
[ ] (Menu)
→
<System Settings>
→
<Communication
Management Settings>
→
<Fax Settings>
→
<RX Start
Speed>
Setting
(Bold: Default setting)
33600 bps , 14400 bps, 9600 bps,
7200 bps, 4800 bps, 2400 bps
Memory Lock Settings
Normally, received documents are immediately printed.
However, you can specify whether or not to store received
faxes in memory before printing. You can then print the
stored faxes at any time or delete them without printing to
save paper.
How to access the option
[ ] (Menu)
→
<System Settings>
→
<Communication
Management Settings>
→
<Memory Lock Settings> (*)
* If <Memory Lock PIN> is specified, use the numeric keys
[ ] to [ ] to enter those numbers, and then press [OK].
Settings
(Boldface: Default setting)
Off Disable Memory Lock.
On
Memory
Lock PIN:
Seven-digit
number
Once the PIN is set, you are prompted to
enter it every time you change or
disable the Memory Lock mode settings.
Print Report:
Off, On
Specify whether to print the RX result
report when receiving a fax.
Enable “Receive Results” to enable this
setting.
Memory
Lock Time:
Off
, On
When <On> is set, received faxes are
stored in memory only for a specified
length of time.
Set <Memory Lock Start Time> and
<Memory Lock End Time> respectively.
NOTE
Memory Lock PIN
• Press [OK] without entering any numbers when you do not want
to set the PIN.
• You cannot set a PIN consisting only of <0> (<0000000>).
• When you set a PIN starting with <0>, the PIN is set in the
following manner.
Example: When you enter <02> or <002>, the PIN is set as
<0000002>.
Memory Lock Settings operations
• When memory lock settings are changed from <On> to <Off>,
the documents saved in the memory up to then are combined
and printed.
“Combining and Printing the Received Documents You
Saved” (
→
P.6-19)
• At <Memory Lock End Time>, you can combine and print
received documents saved in the memory from the <Memory
Lock Start Time> to the <Memory Lock End Time>.
Select Country/Region
Specify the country or region where the machine is used.
IMPORTANT
After you have configured the option
Restart the machine to take effect the changes.
How to access the option
[ ] (Menu)
→
<System Settings>
→
<Select Country/
Region>
Setting
(Bold: Default setting)
United States (US)
, Canada (CA),
Brazil (BR), Mexico (MX), Other
Address Book PIN
Set a PIN to protect the address book. You are prompted to
enter the correct PIN to register, edit, or delete destinations.
How to access the option
[ ] (Menu)
→
<System Settings>
→
<Restrict TX
Function>
→
<Address Book PIN>