manualshive.com logo in svg

Canon Color Bubble Jet BJC-2000 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon Color Bubble Jet BJC-2000 Series Скачать руководство пользователя страница 96

5. SENSOR FUNCTIONS

The printer has a pick-up roller sensor, paper end sensor, home position sensor (purge
sensor), printer temperature sensor, and head temperature sensor.
Furthermore, the EEPROM counts and records the waste ink absorption amount.  When
the waste ink absorber becomes full, the waste ink absorption amount indicates an
error.

5.1 Pick-up Roller Sensor

The photo interrupter-type pick-up roller sensor detects the initial position of the sheet
feeder pickup roller.  When the initial position is detected, the flag interrupts the
sensor.

5.2 Paper End Sensor

The photo interrupter-type paper end sensor detects with the paper sensor arm's flag
the presence of paper when the edge of the paper sheet passes through the paper
feeding mechanism.  When there is no paper the sensor is closed, however the sensor is
opened when paper is defected.

5.3 Home Position Sensor (Purge Sensor)

The photo interrupter-type home position sensor senses the home position edge and
carriage position.  After the edge is detected, the carriage moves to the right.  The
position where the maintenance jet is executed becomes the home position.
Also, at the capping position, the on/off of the purge sensor flag during the recovery
operation is detected.

5.4 Temperature Sensor

The temperature sensor is a thermistor which detects the printer's internal
temperature. The thermistor resistance fluctuates with any temperature changes.  The
change in resistance is detected as a change in the voltage by the MPU.  The analog
value input to the MPU is converted into a digital value by the internal A-D converter to
detect the temperature.  After the printer temperature is detected, the head-driving and
head temperature adjustment signals are controlled accordingly.

Part 4: Technical Reference

4-28

BJC-2000

Temperature Sensor (TH1)

Flag

Home Position Sensor (Purge Sensor)

Head Temperature

Pick-Up Roller Sensor

Paper End Sensor

Figure 4-23 Sensors

Содержание Color Bubble Jet BJC-2000 Series









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды