manualshive.com logo in svg

Canon Color Bubble Jet BJC-2000 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon Color Bubble Jet BJC-2000 Series Скачать руководство пользователя страница 20

2.2 Printer Precautions

2.2.1 Spur deformation prevention

Do not deform the tips of the spurs.
The spurs come into contact with the paper after printing.  As the actual contact
surface is small, any ink adhering to the spurs is minute and wiped off by the spur
cleaners.  Therefore any ink on the spurs is not enough to contaminate the paper as it
passes.  However, if the spurs become deformed, their contact surface with the paper
increases, causing more ink to adhere to each spur.  Since the spur cleaner is unable
to wipe off all the ink, a line of dotted ink may mask the printed paper.

2.2.2 Static electricity damage prevention

The static charge that accumulates from clothing, etc., can damage electrical
components.  Therefore, never touch the electrical contacts of the carriage ribbon
cable and BJ cartridge.

Part 1:  Safety and Precautions

BJC-2000

1-6

Spurs

Spur Cleaners

Figure 1-6 Spurs and Spur Cleaners

Electrostatic Discharge!

Contact Points

Figure 1-7 Carriage Ribbon Cable’s Electrical Contacts

Содержание Color Bubble Jet BJC-2000 Series









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды