manualshive.com logo in svg

Canon Color Bubble Jet BJC-2000 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon Color Bubble Jet BJC-2000 Series Скачать руководство пользователя страница 78

4) Paper feed mechanism and sheet feeder

The built-in sheet feeder is driven by the paper feed motor.  Plain paper as well as
coated paper, transparencies, back print film, envelopes, etc., can be loaded and fed
automatically into the paper feed mechanism.
Driven by the paper feed motor, the paper feed mechanism rotates the feed rollers to
feed the paper vertically.
When printing transparencies and back print film, remove each sheet from the paper
output tray immediately after it is printed.  This is to allow enough time for the ink
to dry.
The paper ejection operation of this printer is performed using the 

RESET button

.

3.2 BJ Cartridge

3.2.1  Black BJ cartridge structure

The black BJ cartridge consists of a 128 nozzle print head and integrated ink
cartridge.

1) Cartridge cover

The plastic cover is attached to the cartridge body to prevent the ink from leaking
inside the cartridge.
As the ink is consumed, the pressure inside the cartridge decreases in relation to the
atmospheric pressure.  This makes it harder for the ink to be supplied to the head.
To prevent this, the cartridge cover is provided with a pressure adjusting hole for
maintaining constant pressure inside the cartridge body.

2) Ink sponge

The sponge is soaked with black ink.  It is compressed and stored in the cartridge
body.

3) Cartridge body

The plastic case connects the ink sponge with the bubble jet head unit via the ink
filter.

4) Bubble jet head unit

Ink is ejected through the 128 bubble jet nozzles, according to the print signals
received through the signal contact.

Part 4: Technical Reference

4-10

BJC-2000

Figure 4-7 Black BJ Cartridge Structure

Pressure Adjusting Hole

Cartridge Cover

Ink Sponge

Label

Ink Filter

Cartridge Body

Joint Pipe

Aluminum Plate

Signal Contact

128 Bubble Jet Nozzles

Faceplate

Bubble Jet Head Unit

Содержание Color Bubble Jet BJC-2000 Series









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды