Canon CF-1 Скачать руководство пользователя | Manualshive

Страница: 12 / 64

background image

Safety Information

-12-

Safety Precautions

Be sure to follow the safety instructions below to ensure correct operation of the instrument.

Installation and Environment of Use

WARNING

Do not use or store the instrument near any flammable chemicals such as
alcohol, thinner, or benzine. If chemicals are spilled or evaporate, it may result
in fire or electric shock through contact with electric parts inside the
instruments. Also, some disinfectants are flammable.
Be sure to exercise caution when using them.

CAUTION

Do not use or store the instrument in a location with the conditions listed
below. Otherwise, it may result in failure or malfunction, fall or cause fire or
injury.
• Close to facilities where water is used.
• Where it will be exposed to direct sunlight.
• Close to air-conditioner or ventilation equipment.
• Close to heat source such as a heater.
• Surfaces or areas prone to vibration.
• Insecure place.
• Dusty environment.
• Saline or sulfurous environment.
• High temperature or humidity.
• Freezing or condensation.

CAUTION

Do not cover the vent holes on the cover.
Otherwise, the temperature in the instrument may rise and cause fire.

CAUTION

Place the instrument on a firm table.
Do not place it extremely near the edge of a table or it may fall and cause
damage or injury.

Installation Operation

WARNING

Do not connect the instrument except in the manner specified.
Otherwise, fire or electric shock may result.
Also, when other equipment is going to be connected to the instrument using
the connector for interface, be sure that leakage current is within the tolerable
value. For details, please contact your sales representative or local Canon
dealer.

Power Supply

WARNING

Only operate with the type of power supply indicated on the rating label.
Otherwise, fire or electric shock may result.

WARNING

Be sure to turn OFF the power before plugging or unplugging the cables as
indicated in this manual. Also, do not handle the cables with wet hands.
Otherwise, you may get an electric shock that may result in death or serious
injury.

!

!

!

!

!

!

!

000_L-IE-5152E_CF-1.book Page 12 Monday, July 29, 2013 10:30 AM

«
...
10
11
12
13
14
...
»

Содержание CF-1

































































Отзывы:

Нет отзывов

Похожие инструкции для CF-1

Бренд: Samsung Страницы: 134

Бренд: Dalsa Страницы: 111

Бренд: Z-CAM Страницы: 16

Бренд: TRENDnet Страницы: 9

Бренд: NextBase Страницы: 12

Бренд: Ikegami Страницы: 52

CAMEDIA C-3030ZOOM

Бренд: Olympus Страницы: 229

Бренд: AgfaPhoto Страницы: 32

Бренд: Pentax Страницы: 7

Бренд: Hama Страницы: 32

Бренд: Prestigio Страницы: 42

Бренд: DT Research Страницы: 2

Бренд: Z-CAM Страницы: 39

Бренд: DRS Technologies Страницы: 83

Бренд: Edimax Страницы: 20

Бренд: Panasonic Страницы: 45

ecomat100 O2M102

Бренд: IFM Страницы: 25

Бренд: Laon People Страницы: 67

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды