Canon CDI-E207-010, Руководство для продвинутых пользователей

Страница: 50 / 147

48
1
FUNC. Menu * (Standard).
See Menus and Settings (p. 31).
*Default setting.
Use the or button to select
a movie mode and press the
FUNC./SET button.
In or mode, you can
change the recording pixels and
frame rate (p. 40).
2
Shoot.
Pressing the shutter button halfway automatically sets the
exposure, focus and white balance settings.
Pressing the shutter button fully starts recording video and
sound simultaneously.
During shooting the recording time (in seconds) and [ Rec]
appear on the LCD monitor.
Pressing the shutter button fully again stops recording.
Recording will stop automatically under the following cir-
cumstances.
- When the maximum recording time elapses
- When the built-in memory or memory card become full
You are recommended to use a memory card that has
been formatted in your camera to shoot movies (p. 28).
The card supplied with the camera may be used without
further formatting.
Be careful of the following while recording.
- Try not to touch the microphone.
- Do not press any buttons other than the shutter button.
The sound that buttons make will be recorded in the
movie.
- The camera will automatically adjust the exposure and
white balance to suit the shooting conditions during
recording. Please note, however, that the sounds made
by the camera automatically adjusting the exposure may
also be recorded.
The focus and optical zoom settings remain fixed for
subsequent frames at the values selected for the first
frame.
With a wireless connection, movies cannot be shot.