manualshive.com logo in svg

Canon Arizona 2300 Series, Руководство по эксплуатации

Поделиться
Скачать
Canon Arizona 2300 Series Скачать руководство пользователя страница 234

End of Life; Handling of disposal of parts (Japan)

Translation: Handling of disposals. Used consumables and expendables must be discarded by the
customer as industrial waste in accordance with the laws as well the regulations of local
government.

RoHS (China)

The Environmental Protection Use Period (EPUP) applicable for the machine designated for
deliveries to the Peoples Republic of China is 20 years. This EPUP, which does not include
consumables or expendables, does not affect any warranty that is provided for the system and
may not be construed or interpreted as a separate guarantee for the machine.

20

RoHS (Vietnam)

Products sold in Vietnam market comply with following Circular and Decision - "Circular No.
30/1011/TT-BCT dated August 10, 2011 of the Ministry of Industry and Trade stipulating
temporarily the permissible content limitation of some toxic chemicals in the electronic, electrical
products" - Decision No.4693/QD-BCT correcting Circular 30/2011/TT-BCT.

For the statement on Canon Marketing Vietnam website, please see the last paragraph on the
web page of the following URL: 

"http://www.canon.com.vn/personal/web/company/about/"

.

REACH compliance (EEA including Switzerland)

• REACH regulation (EC No 1907/2006) article 33 requires information to be communicated to

customers/end users about the presence of SVHC substances included in the REACH candidate
list when such substances are above the threshold of 0.1% in articles. If such information has
to be communicated it can be found on 

"https://www.canon-europe.com/sustainability/

approach/"

.

Under normal conditions of use, there will be no exposure and no special measures are
required for safe use.

234

Chapter 11 - Regulation Notices

Содержание Arizona 2300 Series





















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды