Canon 8538A001 - i 960 Color Inkjet Printer, Быстрый старт

Страница: 70 / 92

Troubleshooting
65
Printed Paper Curls
or Ink Blots Paper being used is
too thin Use Photo Paper Pro to print images that require a lot of ink (i.e. pictures with
intense colors or photographs).
Color Intensity setting
is too high Reduce the Intensity setting in the printer driver and try printing again.
1. Open the Printer Printer Printer Printer Properties Properties Properties Properties dialog box.
2. On the Main Main Main Main tab, select Manual Manual Manual Manual for Color Adjustment Color Adjustment Color Adjustment Color Adjustment, and then click Set Set Set Set.
3. Drag the Intensity Intensity Intensity Intensity slide bar to adjust the intensity.
1. In the Print Print Print Print dialog box, select Color Option Color Option Color Option Color Option from the pop-up menu.
2. Drag the Intensity Intensity Intensity Intensity slide bar to set the intensity.
Paper feed roller is
dirty Clean the paper feed roller.
See
"Paper Does Not Feed Properly Paper Does Not Feed Properly Paper Does Not Feed Properly Paper Does Not Feed Properly" on page 68.
Printed Surface is
Scratched Inappropriate paper
type used Check to see if the paper you are printing on is too thick or curled.
See
""""Print Media to Avoid Print Media to Avoid Print Media to Avoid Print Media to Avoid" on page 3.
Note that smudging may occur at the top and bottom edges of the paper when
using Borderless Printing. Ensure that the paper you are using is compatible
with Borderless Printing.
See """"Media Types Suitable for Borderless Printing Media Types Suitable for Borderless Printing Media Types Suitable for Borderless Printing Media Types Suitable for Borderless Printing" on page 38.
See "Media Types Suitable for Borderless Printing Media Types Suitable for Borderless Printing Media Types Suitable for Borderless Printing Media Types Suitable for Borderless Printing" on page 41.
Thick paper used Select Prevent paper abrasion Prevent paper abrasion Prevent paper abrasion Prevent paper abrasion in the printer driver.
1. Open the Printer Properties Printer Properties Printer Properties Printer Properties dialog box.
2. Click the Maintenance
Maintenance Maintenance
Maintenance tab and then Custom Settings
Custom Settings Custom Settings
Custom Settings.
3. Select the Prevent paper abrasion
Prevent paper abrasion Prevent paper abrasion
Prevent paper abrasion check box and click Send
Send Send
Send.
Click OK
OK OK
OK when the confirmation message appears.
1. Open the Print Print Print Print dialog box.
2. In the Paper Source Paper Source Paper Source Paper Source pull-down menu, select Prevent paper abrasion Prevent paper abrasion Prevent paper abrasion Prevent paper abrasion.
When Prevent paper abrasion Prevent paper abrasion Prevent paper abrasion Prevent paper abrasion is selected in the Printer Propaties Printer Propaties Printer Propaties Printer Propaties dialog box
(for Windows) or the Print
Print Print
Print dialog box (for Macintosh), the setting is also
applied under direct printing.
Problem Possible Cause Try This
i960_QSG_US.book Page 65 Friday, July 11, 2003 9:57 AM