Canon 600 - Optura 4.3MP MiniDV Camcorder Скачать руководство пользователя страница 71

Страница: 71 / 150

Advanced Functions

Changing the Settings (2)

Adjusting the Audio Recording Level

You can manually adjust the audio recording level of the built-in microphone or an
external microphone.

1. Set the camcorder to

CAMERA•

mode.

2. Set the mode dial to a mode other than

3. Press the MENU button and select [AUDIO SETUP]. Select [MIC

LEVEL], set it to [MANUAL] and press the MENU button.

The audio level indicator appears.

4. Adjust the level with the SET dial.

• The maximum level should only slightly exceed –12 dB.
• Sound may be distorted if the indicator for 0 dB lights up in red.

5. Press the AUDIO LEVEL button.

The green bar disappears.

(

64)

AUDIO SETUP

MIC LEVEL

AUDIO LEVEL button

Содержание 600 - Optura 4.3MP MiniDV Camcorder























































































































































Результаты поиска

Содержание 600 - Optura 4.3MP MiniDV Camcorder

Отзывы:

Canon 600 - Optura 4.3MP MiniDV Camcorder, Инструкция по эксплуатации, Страница: 71 / 150

Результаты поиска

Содержание 600 - Optura 4.3MP MiniDV Camcorder

Отзывы: