Safety Instructions
14
Pay attention to the following points regarding the power source, power plug and
handling of the connector. Failure to do so may cause a fire or electric shock.
•
Do not remove the power plug or connector with wet hands.
•
Insert the power plug and connector securely up to the base.
Additionally, do not use a damaged power plug or an outlet that is
loose.
•
Do not pull the power cord and be sure to hold the power plug or
connector when removing. Incorrect handling may damage the
power cord.
•
Before using an extension cord, check carefully to avoid
exceeding the cord’s rated capacity.
•
Periodically inspect the power plug and outlet and remove any
dust or dirt from between the plug and the outlet.
•
Do not touch the projector itself, the power cord, or the cable if
lightening strikes.
•
Do not move the projector until you have switched off the power,
removed the power plug from the power outlet and unplugged
any other cables.
•
Unplug the projector before cleaning or maintenance.
Installation and Use
Pay attention to the following points regarding installation and handling of the projector.
Failure to do so may cause a fire, electric shock or personal injury.
•
Do not use the projector where it might get wet, such as outdoors
or by bathtubs or showers.
•
Do not place containers containing a liquid on top of the
projector.
•
Do not remove the cabinet from the projector or disassemble it.
The interior of the projector contains high-voltage components as
well as parts that are hot. If inspection, maintenance or repair is
required, contact the Canon Customer Support Center.
•
Do not disassemble or modify the projector (including
consumable parts) or the remote control.
Содержание 4K600STZ
Страница 17: ...17 Safety Instructions Safety Instructions ...
Страница 74: ...74 ...