Canon 1200D, Инструкция по эксплуатации

Страница: 244 / 342

w Printing
244
4
Set the printing effects (image
optimization).
Set them if necessary. If you do not
need to set any printing effects, go to
step 5.
Contents displayed on the screen
differ depending on the printer.
Select the option, then press <
0
>.
Select the desired printing effect, then
press <
0
>.
If the <
e
> icon is displayed brightly
next to <
z
>, you can also adjust
the printing effect (p.246).
* When you change the printing effects, changes are reflected in the image
displayed on the upper left of the screen. Note that the printed image may
look slightly different from the displayed image, which is only an
approximation. This also applies to [Brightness] and [Adjust levels] on
page 246.
Printing Effect Description
E On
The image will be printed using the printer’s standard colors.
The image’s Exif data is used to make automatic corrections.
E
Off No automatic correction will be applied.
E Vivid
The image will be printed with higher saturation to produce
more vivid blues and greens.
E NR
Image noise is reduced before printing.
0
B/W
Prints in black-and-white with true blacks.
0
Cool tone
Prints in black-and-white with cool, bluish blacks.
0
Warm tone
Prints in black-and-white with warm, yellowish blacks.
z
Natural
Prints the image in the actual colors and contrast.
No automatic color adjustment is applied.
z
Natural M
The printing characteristics are the same as the “Natural”
setting. However, this setting enables finer printing
adjustments than with “Natural”.
E Default
The printing will differ depending on the printer. For details,
refer to the printer’s instruction manual.