Canon 0585C006, Инструкция по эксплуатации

Страница: 97 / 108

97
Troubleshooting Guide

Set the shutter speed 1 stop slower than the flash sync speed (p.49).

The sender unit’s LCD panel illuminates or turns off according to the
charge status of the sender unit and receiver units (firing groups).
See “LCD Panel Illumination” on page 54.
 Linked Shooting

If you fire multiple Speedlites at the same time during linked
shooting, the appropriate exposure may not be obtained or uneven
exposure may result. It is recommended to set only one Speedlite to
fire or to use a self-timer to space out the timing of the flashes.
 Optical Transmission Wireless Flash Shooting

Set the receiver unit to <
: i
> (p.73).

Set the transmission channels of the sender unit and receiver unit to
the same numbers (p.73).

Check that the receiver unit is within the transmission range of the
sender unit (p.72).

Point the wireless sensor of the receiver unit toward the sender unit
(p.72).

If the sender unit and receiver unit are too close, the transmission
may not take effect properly.

When using the camera’s built-in flash as the sender unit, raise the
camera’s built-in flash, and set [
Wireless func. ] on the camera’s
[ Built-in flash func. setting ] screen.
< k > is displayed.
The LCD panel illumination turns on and off.
Standard exposure is not obtained /
Uneven exposure occurs.
The receiver unit does not fire.