Canon 0585C006, Инструкция по эксплуатации

Страница: 55 / 108

55
This section describes the basic fully
automatic wireless shooting when using
a 430EX III-RT attached to the camera
(sender) and a 430EX III-RT set as a
receiver unit.
1
Set the sender unit.

Set the 430EX III-RT attached to the
camera as the sender unit (p.50).

You can also use a device equipped
with the radio transmission wireless
sender function as the sender unit.
2
Set the receiver unit.

Set the 430EX III-RT to be controlled
wirelessly from the sender as the
receiver unit (p.50).

Set the firing group to A, B, or C (p.59).
The flash will not fire if it is set to D or E.
3
Check the channel and ID.

If the transmission channels and
wireless radio IDs of the sender unit
and receiver unit are different, set
them to the same settings (p.51, 52).
4
Position the camera and the flash.

Position them within the range shown
on page 46.
a
: Fully Automatic Wireless Flash Shooting
Autoflash Shooting Using One Receiver Unit
Firing group