Canon 0585C006, Инструкция по эксплуатации

Страница: 59 / 108

59
You can divide the receiver units into two
firing groups, A and B, and adjust the
lighting balance (flash ratio) for shooting.
The exposure is controlled automatically
so that the total flash output of firing
groups A and B results in the standard
exposure.
1
Set the firing group of the
receiver units.

Operate and set the receiver units one
by one.

Press < 8 >.

Turn <
9
> to select the firing group
symbol, then press <
8
>.

Turn < 9 > to select <
a
> or <
b
>,
then press <
8
>.

Set one unit to <
a
>, and the other
unit to <
b
>.
2
Set the sender unit to <
5
>.

The procedures in steps 2 to 3 are to
be set on the sender unit.

Press <
8
>.

Turn <
9
> to select the firing group
control symbol, then press < 8 >.

Turn <
9
> to select <
U
>, then
press <
8
>.
5
: Wireless Multiple Flash Shooting with Flash Ratio
Autoflash Shooting with Two Receiver Groups
A
B
Firing groups
Firing group control