II. PCB Sockets and Connection Parts
CN1
LED
Dual-Color LED indicator.
1. Red light: Warming up.
2. Green light: Ready for strapping.
3. Green flashing: In operation.
4. Red flashing: Abnormal (Details as item “E”)
CN2
SAF-L
Photo protector couple. (Left side)
CN3
SAF-R
Photo protector couple. (Right side)
CN4
PHF1
Photo sensor, control length of tape supply for MF 1
CN5
PHF2
Photo sensor, control length of tape supply for MF 2
CN6
PHF3
Photo sensor, control length of tape supply for MF 3
CN7
PHC
Photo sensor, control stop angles of cam.
CN8
TP1
Tape forward and reverse buttons for MF 1.
1. White button: Tape forward button (Pin 1 and 2)
2. Yellow button: Tape reverse button (Pin 2 and 3)
CN9
TP2
Tape forward and reverse buttons for MF 2.
1. White button: Tape forward button (Pin 1 and 2)
2. Yellow button: Tape reverse button (Pin 2 and 3)
CN10
TP3
Tape forward and reverse buttons for MF 3.
1. White button: Tape forward button (Pin 1 and 2)
2. Yellow button: Tape reverse button (Pin 2 and 3)
CN11
T1
Thermal couple for No.1 heater assembly set, control temperature.
CN12
T2
Thermal couple for No.2 heater assembly set, control temperature.
CN13
T3
Thermal couple for No.3 heater assembly set, control temperature.
CN14
T4
Thermal couple for No.4 heater assembly set, control temperature.
CN15
T5
Thermal couple for No.5 heater assembly set, control temperature.
CN16
STL
Left start button
Emergency stop. (When pressing banknotes)
CN17
STR
Right start button
Emergency stop. (When pressing banknotes)
CN18
MF1
DC motor, No. 1 tape feeding driver.
Running in counter clock-wise to supply tape.
Running in clock-wise to eject tape.
CN19
MF2
DC motor, No. 2 tape feeding driver.
Running in clock-wise to supply tape.
Running in counter clock-wise to eject tape.
CN20
MF3
DC motor, No. 3 tape feeding driver.
Running in counter clock-wise to supply tape.
Running in clock-wise to eject tape.
CN21
H1
Ceramic heater, provides sealing heat for No. 1 heater assembly set.
CN22
H2
Ceramic heater, provides sealing heat for No.2 heater assembly set.
CN23
H3
Ceramic heater, provides sealing heat for No.3 heater assembly set.
– 12 –
Содержание S-35
