Cannondale Trigger 26ER, Руководство пользователя

Страница: 23 / 38

22 22
6
8
1
M3X10
Loctite 242 (blue)
2.5 Nm (22 InLbs)
5mm
Loctite 242 (blue)
7 Nm (62 InLbs)
5mm
Loctite 242 (blue)
10 Nm (88.5 InLbs)
5
5
4
4
2
3
7
10
9
DROPOuT - TRIGGER 26’ER
IDEnTIFICaTIOn
1. Seat Stay
2. Left Dropout
3. Right Dropout
4. Pivot Spacers
5. Pivot Axle Bolts
6. Rear Derailleur Hanger
7. Brake Adapter(s)
8. Chainring Bolts 16mm
9. Circlip
10. Bearing
Before attachment, inspect the bearings to make sure they are in
good condition.
Check the seat stay If the bearings are damaged, remove them
and replace them with new ones.
Always insert small end of pivot spacers into the bearings. The flat
side of the spacers face out.
Always insert a 5mm hex key completely into the axle bolts to
prevent damage when turning the bolt.
Always tighten with a torque wrench to the specified torque.