Cannondale Trigger 26ER, Руководство пользователя

Страница: 29 / 38

28 28
4
7
3
4
10
9
2
8
1
5
M4X8
M4X16
M4X13
M4X13
6
5mm
Loctite 242 (blue)
7 Nm (62 InLbs)
5mm
Loctite 242 (blue)
10 Nm (88.5 InLbs)
5mm
Loctite 242 (blue)
7 Nm (62 InLbs)
Loctite 242 (blue)
2.5 Nm (22 InLbs)
12 11
DROPOuT - TRIGGER 29’ER
IDEnTIFICaTIOn
1. Seat Stay
2. Left Dropout
3. Right Dropout
4. Pivot Spacers
5. Pivot Axle Bolts
6. 135mm Hub Spacers
7. Rear Derailleur Hanger
8. 12mm Rear Axle
9. Brake Adapter(s)
10. Chainring Bolts 16mm
11. Circlip
12. Bearing
Before attachment, inspect the bearings to make sure they are in
good condition.
Check the seat stay If the bearings are damaged, remove them
and replace them with new ones.
Always insert small end of pivot spacers into the bearings. The flat
side of the spacers face out.
Always insert a 5mm hex key completely into the axle bolts to
prevent damage when turning the bolt.
Always tighten with a torque wrench to the specified torque.