Cannondale SuperSix EVO Neo, Дополнение к руководству пользователя

Страница: 21 / 36

19 137377 Rev 1.
SuperSix EVO Neo - Owner’s Manual Supplement
Headtube Steering Angle
NOTICE
Do not force the steering past the stop
points.
If the front end steering of the bikes is
over-loaded (due to e.g. a handlebar
strike, a crash, etc.) damage to the frame,
fork or pin may result.
This type of damage is not covered by the
limited warranty.
Underside of headtube.
1. Fork Stop Pin 2.
Head Tube Stop
Limits
3. Steering Angle
3
0°
55° 55°
2
1
2
2 N·m
2
1
NGLI-2
To replace:
Remove the rear wheel.
Remove the mounting screw(s) and remove the old
hanger from the dropout.
Clean the area around the dropout and inspect the
frame carefully for any cracks or damage. If you
find damage have the frame inspected by your
Cannondale Dealer .
If the dropout is un-damaged, apply a light film
of grease between the frame and mount. This
will help minimize any noise or “creaking” that
might result from very slight movement between
the dropout and mount during movement of the
derailleur.
Slide the new hanger onto the dropout.
Clean and apply Loctite® 242 (or medium strength
thread lock) to the screw threads and tighten to the
specified torque.
Rear Derailleur Mount
1. RD Mount 2. M3 X 10 Screws