7
Lefty Hybrid Owner’s Manual Supplement 129143.PDF
1
1.
2.
2
3.
4.
3
50/50
4
SAG
To set sag:
1. Remove the Schrader valve cap (1) at the
bottom of the LEFTY. Attach a bicycle
suspension pump to the Schrader valve
(2).
See Figure 1.
2. Set the recommended intial starting air
pressure according to your weight.
3. Slide the sag O-ring (3) against the wiper
seal (4).
See Figure 2.
3. Sit on bike in riding position and
dismount.
Note: Your riding position affects weight
distribution and therefore sag. For
example, in the “Attack” position
(
Figure 3
). the rider’s weight is distributed
equally front and rear.
4. Measure the sag distance.
See Figure 4.
Sag Trouble Shooting
Too much sag
add air in small
increments
Too little sag
reduce air in small
increments
Excessive
bottom out
increasing air pressure
harsh ride or
limited travel
reduce air pressure
NOTICE
A dirty pump or valve end can result in
contamination, damage, and air loss.
Make sure pump and valve are clean
before attachment.
Attack
