14
HeADsHoK sUsPensIon FoRK
Fatty w/DL50
Your E-Series bicycle is equipped with a Cannondale Headshok Fatty suspension fork. The fork features the DL50 damping
cartridge. The internal spring size can be changed to accomodate various rider weights to tune performance. This fork is
designed for a 700c wheel. The brake mounts are international standard. The fork features several accessory mounting points as
shown in the figure, next page.
to operate fork lockout:
see Figure 12.
The lockout lever turns fork travel “on” and “off.” Be sure to rotate the lever completely to either
position until it stops.
to change the lever position:
Remove the retaining screw with a 3 mm Allen key andcarefully lift off the lockout lever with your fingers.
Reposition the lever while aligning it with the large nut. Press it onto the large nut. Reinstall the retaining screw
and tighten to 0.5 Nm, 4 in Lbs.
Figure 12.
notICe
Do not force lever past the stop. Do not try to un-thread the large nut under the lever. It is pressed on!
to change the adjustable stem:
see Figure 13.
The angle of the handlebar can be raised or lowered depending on your preference. To change
handlebar height, loosen the stem angle fixing bolt (23), then raise or lower the handlebar . When the handlebar
is in the desired position, use a torque wrench to tighten the fixing bolt to 17-18Nm.
on
oFF
