10
oPeRAtInG InstRUCtIons
to turn the drive assist system on / oFF:
see Figure 7.
Press the battery ON/OFF button (1) . When you do this, the battery charge level LEDs (2) will illuminate
indicating current battery charge level and the HMI computer display will turn on. When all LEDs are lit, the battery level is
100%. Each LED corresponds to about 20% capacity.
the system will turn oFF automatically after 10 minutes of inactivity or if the battery is empty.
2
1
100%
Figure 7.
Lighting
Drive system Battery supplied (eU, all countries except Germany)
The lighting is powered by the drive system battery.
to turn the lights on/off:
see Figure 4.
Presss the light button (5) on the HMI.
When the lighting is turned on the computer unit back light illumination is
on, the indicator (9) appears on the computer display. Lighting will remain on until it is turned off with the button or power from
the battery or wheel hub generator is no longer available. If the drive assistance is disabled due to a low battery charge level,
lighting will remain on until the battery is completely discharged.
Hub Dynamo supplied (Germany)
If the lighting system is supplied solely by a wheel hub generator (isolated from the drive system battery by legal requirement) it
can not be turned on with the HMI. Lighting must be turned on/off by the seperate lighting unit switches.
trip Information
see Figure 4.
Use the infomation reset select button (3) to interact with the features of the cyclometer: Speed, Average Speed,
Total Trip, and Trip Distance.
