16
Setting Sag:
1. Set shock to the FLOW - 150 mm (long travel)
mode with the remote lever. In this mode, the
sag you set will be 100%. When the DYAD RT2
is switched to the ELEVATE - 110mm mode , the
sag is automatically reduced to 60%.
FLOW mode
(long travel)
150 mm
FWD
ELEVATE mode
(short travel)
90 mm
2. Remove
negative air valve cap.
Connect the pump (Cannondale 1MP01/SLV) to
the negative air pressure valve, press and hold
the release button to release all air pressure.
Replace the valve cap.
4. Remove
positive air valve cap. Attach the
pump to positive air valve.
Set positive air pressure for your weight
according to the DYAD RT2 Recommended Air
Pressure table. Replace the valve cap.
5. Again, attach pump to
negative air
chamber valve and set negative air pressure for
same weight. Replace the valve cap.
After setting sag, you find that you want more
or less sag, choose the next lighter or heavier
rider weight range from the table. Repeat
steps 1-5 again.
Left-hand lever set-up shown here.
Содержание Claymore
Страница 27: ......
