Cannondale Adventure Neo Allroad 2023, Дополнение к руководству пользователя

Страница: 18 / 32

16
Adventure Neo AllRoad OMS
Technical Information
Battery Power ON, Power OFF
185533 Rev0 (03/23)
Battery Power ON, Power OFF
The battery pack can be powered on and powered down in several ways as below. Make sure to
power OFF the battery before installing the battery into the battery mount.
Mode Methods
Power ON
(Wake Up)
• The Power/SOC button wake-up: Please press the
Power/SOC button to wake-up and power on the battery
pack.
• The HMI power button wake-up: Please press the HMI
power button to wake up and power on the battery pack.
• Charger-In wake-up: Please connect the charger to the
battery pack. The charger will wake up and power on the
battery pack.
Power OFF
(Shut down/ Ship mode)
• The Power/SOC button: Please press the Power/SOC
button and hold it for 3 seconds until all LEDs are
flashing. And then release the button to power down the
battery.
• *Idle shut down mode: When the battery pack is idle for
1 minute the battery pack will enter shut down mode.
• Under Voltage shut down mode: When the under voltage
protection is triggered and there is no any release action
for 30 seconds, the battery pack will enter the shut down
mode.
* idle means discharge or current is less than 30mA
Charging
The battery pack can be charged while it is mounted on the bike or while it is removed from the
bike.
To charge on the bike - Bring the bike to an area where it can be connected to the specified charger
and remain undisturbed during the charging time. Open the charge port cover and connect the
charger connector to the battery rack. Plug-in the charger to its source of power and charge the
battery. When charging is complete, unplug the charger, then remove the charge connector from
the battery rack and close the port cover.
When the battery is off the bike, under the same conditions noted above, connect the charger
directly to the charge port on the back of the battery. Remove and unplug the charger and the
battery when charging is completed.