21
8/14/02
21
CANNONDALE DIAGNOSTIC AND
MAINTENANCE TOOL VERSION 2.0
This section of the manual describes how to use
t he Ca nn on da le D ia gn ost ic an d M a in te na nce
software tool.
GENERAL INFORMATION
The Cannondale Diagnostic and Maintenance
Tool, Version 2.0 is a Windows-based software appli-
cation enabling communication with the vehicle ECU.
Use the tool for:
•
Changing the ECU operating code or “hex” file.
•
Installing a new engine calibration file.
Refer to "Sending a calibration file or “map” to
the ECU - “Changing a map”" starting on
page 34.
•
Receiving the current engine calibration file
from the vehicle ECU to the PC.
•
Set the vehicle throttle body and injector
variables.
•
Monitor the (vehicle) ECU operating
parameters.
•
Read system faults.
A special interface cable is needed to connect the
PC to the vehicle once the software is installed and
authorized for use.
INSTALLATION
Installing the software
1. Insert the installation CD into the CD drive of your
computer.
Right click on the Windows START button in the
lower left corner of the screen.
Use Windows Explorer, click on the CD drive
containing the Cannondale Dealer Cal software
CD to view the file contents.
2. Double click on the Setup.exe application.
3. Follow the installation screens. When the setup
process is complete, the Cannondale Diagnostic
and Maintenance program group will be installed
and a shortcut to the Cannondale Diagnostic and
Maintenance tool will be placed on the your desk-
top.
But, before you can use the software, you’ll need
to complete the authorization process by making
a telephone call and typing in an authorization
number.
